The Ferris IS3200Z lawn mower is often hailed for its amazing features and capabilities. However, just like any other lawn mower on the market, the Ferris IS3200Z is far from perfect. Below we highlight some of the common Ferris IS3200Z problems.
Table of Contents
What is Ferris IS3200Z?
The Ferris IS3200Z is a zero turn riding mower which was invented by the company Ferris. The mower is powered by a Briggs and Stratton Vanguard engine. The Ferris IS3200z is a commercial mower meaning it has a powerful engine.
Ferris IS3200Z problems
NB: Ferris IS3200Z lawn mowers are sold without any defects and as result the problems mentioned in this article are as a result of wear and tear of the lawn mower.
Excessive vibration
This is one of the major Ferris IS3200 problems that are as a result of wear and tear. Originally the Ferris IS3200Z is designed to vibrate whilst you are mowing however, it tends to vibrate excessively after some time. In order to solve this problem the first thing you need to do is to check the blades on your mower to ensure that they are correctly angled. Also check the bearing and ensure that everything is well balanced. If the problem persists then seek the guidance of a professional repairer.
Difficulty in raising the mower
This is also another Ferris IS3200Z problem which is a result of damaged lifting linkages. In order to solve this problem you have to open the air filter and check if it’s clogged. If it is, remove any dirt or debris to fix the problem. If this fails then you will have to seek help from a qualified repaired who is able to diagnose the real problem and solve it.
Problems in starting the mower
Another Ferris IS3200Z problem is that it is difficult to start and in some cases it refuses to even start. This problem is one of the hardest to solve because there are many reasons which can be causing your mower not to start. With that being said the first thing you need to check is your fuel tank to see if there is enough fuel. The Ferris IS3200Z mower will not start if there is no fuel in the tank. The next thing you need to do is to check the spark plug since its responsible for generating electric current that starts the whole machine. If the spark plug is broken you will need to replace it. The other option you have is to check the air filter and remove any dirt if it is clogged. This is because if the air filter is clogged it will not be able to provide enough air to the engine thus, causing the lawn mower not to start. Also check the carburettor to see if it’s not clogged. If all these options fail you have to check the hydraulic system for any leakages or bad connections.
Difficulty in mowing wet grass
This is also another common Ferris IS3200Z problem. This lawn mower is designed to cut both wet and dry grass but, this is not the case. In order to solve this problem, ensure that the blades are sharpened before trying to cut your grass. When cutting the grass make sure you slow down your engine and give the blades enough time to cut through the grass, do not rush the process. If you follow these easy steps then your Ferris IS3200Z will be able to cut through wet grass.
Traction
The Ferris IS3200Z mower has traction problems which are mainly caused by dirt entering certain parts. For example if dirt enters the blades, there is a good chance that you will experience traction problems. Therefore, always ensure that you remove any dirt from the blades in order to avoid this problem. Furthermore, you should also check your fuel level of your mower because there are some engine problems that are misinterpreted as traction.
Hydro-gear problems
The Ferris IS3200Z mower has a hydro-gear system which uses hydraulic fluid in place of gears to transmit energy. While the hydro-gear system is efficient in reducing rapid wear and tear, it actually has its downfalls as it allows air to enter the line through a break in connection. This ultimately affects the lawn mowers ability to build adequate pressure and operate efficiently.
Brake problems
Another common Ferris IS3200Z problem is poor brake functionality. In order to solve this problem you need to ensure that the brake callipers are tight enough or not worn out. If they are worn out, you need to replace them before using the mower.
Difficulty in turning wheels
This is also another Ferris lawn mower problem which is a caused by uneven wheels on the mower. So make sure that you balance the wheels and insert enough steering oil in the lawn mower so that the wheels can easily turn.
Is Ferris a good lawn mower?
The honest truth is that, Ferris is a good lawn mower. It has insane specifications and most of their engines are designed by Briggs and Stratton. Ferris lawn mowers are also good because they have a longer durability as compared to other lawn mowers. This means if you handle the Ferris lawn mower very well, it will last for couple of years without needing any repairs.
Where are Ferris zero turn mowers manufactured?
Ferris zero turn mowers are manufactured in Sherrill which is in Central New York. The Ferris zero turn mowers have a longer durability as compared to other lawn mowers and most of their engines are designed by Briggs and Stratton.
Who bought Ferris mowers?
Briggs and Stratton bought Ferris mowers in 2004. They also purchased Simplicity manufacturing together with its other subsidiaries like Snapper and Giant-Vac. This is one of the main reasons why most Ferris engines are designed by Briggs and Stratton.
Conclusion
Although the Ferris IS3200Z has the potential of developing any of the problems listed in the article above, it is still a magnificent lawn mower to own. It is very durable, comfortable and most of all efficient so you are guaranteed value for your money.