Massey Ferguson 375 Problems : 5 Common Issues (Explained)

Massey Ferguson makes a wide range of tractors. One of the models they make is the Massey Ferguson 375. Our discussion will inform you on the common Massey Ferguson 375 problems you must know. This will help you avoid, detect, or rectify them.

Table of Contents

What Is The Massey Ferguson 375?

The Massey Ferguson 375 is a 75 HP tractor. It comes with 2WD or 4WD. It is a powerful, durable, and affordable tractor. It also features a compact design for ease of operation. Good as that may be, the Massey Ferguson 375 does have some common problems. Here they are:

Massey Ferguson 375 Problems

Problems mostly arise from usage dynamics. That is why some Massey Ferguson 375 operators never encounter problems whilst others may. Regardless, you must be abreast with common Massey Ferguson 375 problems such as the following:

1. Engine Malfunction

This is a problem that occurs in a Massey Ferguson 375 is several ways. At times the engine may not start. Sometimes it stops rotating. You may also notice the engine will be running irregularly. Engine malfunction may be due to:

  • Dirty or wrong fuel.
  • Faulty, dirty, or leaking fuel pump.
  • Fuel pump timing could be wrong.
  • Throttle cable may be faulty.
  • Speed sensor could be faulty.

Troubleshooting Engine Malfunction Problem

Your Massey Ferguson 375’s engine malfunction can be an intricate problem. It can be due to many often interrelated variables. Thus be thorough in your checks. Possible solutions to the problem are:

  • Replace or use the right fuel grade.
  • Fix, clean, or replace the fuel pump.
  • Adjust the fuel pump timing.
  • Fix or replace faulty cables e.g. throttle cable.
  • Fix or replace the speed sensor.

2. Steering Malfunction

When operating a Massey Ferguson 375 you may stumble across steering complications. The steering may become too stiff to turn. It may start turning too loosely. Steering malfunction may be caused by:

  • Hydraulic oil level may be too low.
  • Hydraulic cylinder of the steering could be faulty.
  • Steering pump may be faulty.
  • Hydraulics may have air contamination.

Troubleshooting Steering Malfunction Problem

When operating your Massey Ferguson 375 the steering must turn with some considerable but mild resistance. Anything below or above that balance becomes problematic. To rectify a malfunctioning steering you can:

  • Top up the hydraulic oil.
  • Plug any leakages.
  • Fix or replace the hydraulic cylinder.
  • Fix, clean, or replace the steering pump.
  • Get rid of air in the hydraulics.

3. Engine Not Starting

After resting one may find the Massey Ferguson 375 engine not starting. In other cases, the engine may stop and refuse to start. Another scenario is that the engine may be hard to start i.e. it takes time. Here are the possible causes:

  • Air filter could be dirty or faulty.
  • Fuel filter could be dirty or leaking.
  • Fuel lines may be blocked or leaking.
  • Piston rings may be worn out.
  • Gasket could be leaking.
  • Fuel quality may be poor.
  • Starter may be faulty.

Troubleshooting Engine Not Starting Problem

Massey Ferguson 375 engine not starting problems are varied. Whatever the issue may be, you can resolve it by exploring the following:

  • Fix, clean, or replace filters e.g. air and fuel filters.
  • Clean, plug, or replace fuel lines.
  • Replace piston rings.
  • Plug or replace gasket.
  • Fix or replace starter.
  • Replace or use better quality fuel.

4. Motor Complications

The motor is an integral part of the Massey Ferguson 375. Whenever the Massey Ferguson 375 is in operation, the motor plays a crucial role. No wonder it tends to happen that the motor experiences some complications. Possible causes are:

  • Fuel lines may have blockages or leakages.
  • Intake hoses may have air leaks.
  • There may be clogs in the air and fuel filters.
  • Starter speed may be too slow.
  • Injection nozzles may be faulty
  • Exhaust pipe may be blocked.

Troubleshooting Motor Complications Problem

When the motor of your Massey Ferguson 375 starts acting up, it requires urgent attention. Check to figure out the root cause(s). The solutions you can explore to address the problem are:

  • Plug, clean, or replace fuel lines and intake hoses.
  • Clean or replace fuel and air filters.
  • Fix or replace the starter.
  • Fix the injection nozzles.
  • Clean the exhaust pipe.

5. Engine Overheating

When operating the Massey Ferguson 375 you must be on the lookout for engine overheating. Massey Ferguson 375 engine overheating may be due to:

  • Coolant level gone down.
  • Engine oil level too low or high.
  • Engine could have been overloaded.
  • Fan belts could be damaged or not fitted properly.
  • Radiator may be damaged.

Troubleshooting Engine Overheating Problems

Do not delay when you notice your Massey Ferguson 375 overheating. Immediately address the problem by exploring the following options:

  • Ensure enough coolant is in the tank and it is not leaking.
  • Ensure engine oil level is at the prescribed level.
  • Fix or replace damaged fan belts.
  • Ensure fan belts are not too loose or tight.
  • Fix or replace the radiator.
  • Do not overload the tractor.

How To Avoid Massey Ferguson 375 Problems

Before and after every operation, thoroughly inspect your Massey Ferguson 375. Conduct regular scheduled servicing and maintenance. Clean your Massey Ferguson 375 after every use and keep it in a place away from the elements. Do not operate it recklessly.

What Is The Engine Capacity Of The Massey Ferguson 375?

The Massey Ferguson 375 has an engine capacity of 4.1 liters. Its fuel filter is dual and has a high capacity.

Why Should I Choose The Massey Ferguson 375?

The Massey Ferguson 375 delivers exceptional power and comfort in operation. The Massey Ferguson 375 is made out of resilient material making it suited for use under any weather. It is a heavy duty tractor which can be used for a wide range of applications. You can use it in farming, construction, haulage, or basic utility functions. The Massey Ferguson 375 has a reasonable price point too.

Conclusion

Avoiding, detecting, or fixing Massey Ferguson 375 problems boils down to you. If you are responsible enough, problems will be minimal or mild. It is also advisable to work with qualified professionals for guidance.