The Makita LS1019L compound mitre saw is one of the best mitre saws you may ever use. However, even the best power tools can sometimes have problems and in this article we will look at some of the most common problems that users experience with the Makita LS1019L, as well as some solutions to those problems. Let’s get into it.
Table of Contents
What Is The Makita LS1019L?
The Makita LS1019L is a compound mitre saw that is designed for professional use. It has a 10-inch blade and a powerful motor that makes it capable of cutting through even the thickest pieces of wood. The compound mitre saw also features a laser guide system that helps to ensure accurate cuts every time. The Makita LS1019L has a dust collection system that helps to keep your work area clean and free of debris.
Makita LS1019L Problems
1. Blade Alignment Issues
One of the most common problems that users experience with the Makita LS1019L is with its blade alignment. If the blade is not aligned properly, it can cause inaccurate cuts and can even be dangerous. This may be caused by;
- Loose screws
- Wrong/ faulty adjustment
Troubleshooting The Blade Alignment Issues
- Start by unplugging the compound mitre saw and removing the blade.
- Then use a square to check the alignment of the blade. If the blade is not aligned properly then you will need to adjust it. Loosen the screws that hold the blade in place and adjust the blade until it is aligned properly.
- Once the blade is aligned you should tighten the screws and reattach the blade.
2. Motor Problems
Another common problem that users experience with the Makita LS1019L is motor problems. If the motor is not working properly, it can cause the saw to operate inefficiently or not at all. This can be due to;
- A faulty power cord
- Frayed wires
- A damaged or worn out motor
Troubleshooting The Motor Problems
- Be sure to unplug the compound mitre saw and then check the power cord.
- Also make sure that the cord is plugged in securely and that there are no frayed wires or other damage.
- If the power cord is in good condition then the problem may be with the motor itself. You will need to have the motor disassembled and then check the motor. If the motor is damaged or worn out then it will need to be replaced by a professional.
3. Dust Collection Issues
The Makita LS1019L is equipped with a dust collection system that helps to keep your work area clean and free of debris. If the dust collection system is not working properly, it can cause your work area to become messy and difficult to work in. This is likely due to;
- A full dust bag
- A clogged dust port
Troubleshooting The Dust Collection Issues
- You should start by checking the dust bag and make sure that the bag is not full and that it is installed correctly.
- Check the dust port to make sure that it is not clogged with sawdust or other debris. If the dust port is clogged then clean it out with a small brush or compressed air.
4. Laser Guide Problem
The laser guide system on the Makita LS1019L is designed to help you make accurate cuts every time. However, if the laser guide is not working properly, it can cause inaccurate cuts and other unwanted problems. This can be due to;
- Faulty batteries
- A faulty laser guide system
Troubleshooting The Laser Guide System Problem
- You first need to make sure that the batteries are installed correctly and that they are not dead and then replace then if they are.
- Check the laser guide to make sure that it is not dirty or damaged. If the laser guide is dirty then you need to clean it with a soft cloth. And if the laser guide is damaged then it will need to be replaced.
5. Power Cord Problem
The power cord on the Makita LS1019L is an important component that allows the saw to operate. If the power cord is damaged or not working properly, it can cause the saw to operate inefficiently or not at all. This can be due to;
- A frayed or damaged power cord
- A faulty power outlet
- A damaged power switch
Troubleshooting The Power Cord Problem
- Make sure that the cord is not frayed or otherwise damaged.
- Check the outlet that the saw is plugged into and make sure that the outlet is working properly and that it is not overloaded with other devices.
- Check the power switch to make sure that it is not damaged or worn out. If the power switch is damaged then it will need to be replaced.
How To Avoid Makita LS1019L Problems
- Clean the saw after each use to remove sawdust and other debris.
- Keep the blade sharp to ensure accurate cuts and efficient operation.
- Lubricate the moving parts of the saw regularly to prevent wear and tear.
- Check the power cord and other electrical components regularly to ensure that they are working properly.
- Store the saw in a dry and cool place to prevent rust and other damage.
Is The Makita LS1019L Easy To Use?
Yes, the Makita LS1019L compound mitre saw is very easy to use. It has a user-friendly design and comes with clear instructions that make it easy to get started.
Can The Makita LS1019L Be Used For Cutting Metal?
No, the Makita LS1019L is designed for cutting wood and other soft materials. It should not be used for cutting metal or other hard materials.
Conclusion
The Makita LS1019L compound mitre saw is an excellent tool that is designed for professional use. While it may experience problems that will somewhat hinder its performance, many of these problems can be fixed relatively easily. However if you are not confident in your ability to solve any of the above problems yourself, then it is highly advised that you seek the help of a professional compound mitre saw technician to minimize damage to the Makita LS1019L and prevent injuries.