Different sewing machines have different problems and the Janome 6500 is no exception. If you are considering to buy this machine, you definitely need to know some of the problems it faces so that you can be in a better position to troubleshoot them. The article below focuses on some of the most common Janome 6500 problems and how you can easily resolve them at home.
Table of Contents
What Is A Janome 6500?
The Janome 6500, also known as the Memory Craft 6500 is a sewing machine that can be used for both sewing and quilting purposes. This machine is very reliable and can sew 1000 stitches per minute. The Janome 6500 as an automatic thread tension control and an automatic thread cutter. It also as an LED screen which you can use to see the designs you are making.
Janome 6500 Problems
NB: Brand new Janome 6500 sewing machines are sold without any defective parts and the problems indicated below are usually influenced by human error or wear and tear experienced by the machine.
One of the problems which you may experience with the Janome 6500 is that the thread cutter LED light might start blinking. This problem occurs when the following factors are present;
- The presser foot might be raised before the thread cutting is complete.
- Thread might be caught up in the thread cutter mechanism.
When you notice that the thread cutter LED light is blinking please try to use the following techniques when trying to resolve the issue;
- Try to lower the presser foot until thread cutting is complete.
- Remove any threads that may be caught in the thread cutting mechanism.
2. Needle Breaks
The needle of a Janome 6500 can sometimes break. This problem is usually caused by any of the following factors;
- Needle might be inserted wrongly into the machine.
- Needle clamp screw might be loose.
- Wrong presser foot might be used.
- Needle might be too fine for the fabric being sewn.
Troubleshooting Needle Breaks Problem
When you notice that the needle of your Janome 6500 sewing machine is always breaking, please try to use the following techniques when trying to troubleshoot the problem;
- Check whether needle is inserted correctly into the machine. You can refer to your manual, if you need help.
- If the needle clamp screw is loose, please tighten it.
- Use the right presser foot.
- Make sure you are using the correct needle for the fabric which you are sewing.
3. Skipped Stitches
The Janome 6500 can also experience skipped stitches. This problem is usually caused by any of the following factors;
- Needle might be inserted wrongly into the machine.
- Needle or thread might not be compatible with the fabric being sewn.
- Needle thread might not be threaded correctly.
Troubleshooting Skipped Stitches Problem
If your Janome 6500 is producing skipped stitches, here are a few methods you can use to resolve the problem;
- Check whether needle is inserted correctly into the machine.
- Ensure that the thread or needle you are using, is compatible with the fabric you are sewing.
- Retread your needle.
4. Fabric Does Not Feed Smoothly
Another problem which you may experience with a Janome 6500 is that the fabric might refuse to feed smoothly onto the machine. This problem is mainly caused by any of the following;
- Feed dog might have lint.
- Feed dog might not be raised after “drop feed” sewing.
- Stitches might be too fine.
Troubleshooting Fabric Does Not Feed Smoothly Problem
If fabric is not feeding smoothly onto your Janome 6500, here are a few ways in which you can resolve the issue;
- Remove lint that might be stuck in the feed dog.
- Raise the feed dog after “drop feed” sewing.
- Make your stitches longer if they are too fine.
5. Seam Puckering
You may experience seam puckering on your fabric when you are using the Janome 6500. This problem usually occurs when the following factors are present;
- Needle thread tension might be too tight.
- Needle thread might not be threaded properly.
- Stitch length might be too long for the fabric being sewn.
- Needle might be too heavy for fabric being sewn.
- Stabilizer might not have been used when sewing fine fabrics.
- Pressure foot might not be adjusted.
Troubleshooting Seam Puckering Problem
If your Janome 6500 is experiencing seam puckering problems, there are a few methods you can use to try and resolve the issue. Below are some of the methods;
- Adjust needle thread tension such that it is not too tight.
- Rethread needle thread.
- Adjust stitch length and make it shorter.
- Use correct needle for the fabric which you are sewing.
- Apply stabilizer for finer fabrics.
- Adjust pressure foot.
6. Bobbin Thread Breaks
The bobbin thread of a Janome 6500 tends to break. This problem usually occurs when any of the following factors are present;
- Bobbin thread might not be correctly inserted into the bobbin holder.
- There might be lint in the bobbin holder.
- Bobbin might be damaged.
Troubleshooting Thread Breaks Problem
When the bobbin thread of your Janome 6500 keeps breaking, here are a few ways that you can use to troubleshoot the problem;
- Insert the bobbin thread into the bobbin holder the correct way.
- Remove any lint that may be trapped in the bobbin holder.
- If the bobbin is damaged, replace it with a new one.
How Fast Is Janome 6500?
The Janome 6500 is a fast sewing machine and it is able to sew 1000 stitches per minute. This means that you can use this machine for commercial purposes.
Is Janome A Good Brand Of Sewing Machine?
Yes, Janome is a good brand of sewing machine. It produces quality sewing machines that are very durable. So if you are thinking of purchasing any Janome sewing machine, you should definitely do so.
Janome makes good sewing machines and the Janome 6500 is a good example. It is worth noting that most of the problems indicated in this article can be avoided or resolved. So if you are planning on purchasing this machine, you can always resolve the problems using the guide above.