Before buying a sewing machine it is very important that you research about it and the problems it is likely to face in the future. The article below focuses on the Janome Memory Craft 6600 and the problems it might succumb to in the future. Ways of troubleshooting the problems are also indicated so that you do not waste time looking for this information.
Table of Contents
What Is Janome Memory Craft 6600?
The Janome Memory Craft 6600 is a sewing and quilting machine that contains an AcuFeed system that helps to ensure that your sewing and quilting is even, precise and smooth. This machine also contains a display screen that can help you identify which patterns you are stitching. It also as an auto cut thread system that helps to cut thread during the sewing process.
Janome Memory Craft 6600 Problems
NB: Janome Memory Craft 6600 machines are sold without any malfunctioning parts and the problems indicated below are usually influenced by wear and tear experienced by the machine.
1. Thread Cutter LED Blinks
One problem that you might experience with the Janome Memory Craft 6600 is that the LED light of the thread cutter might blink. This problem usually occurs when the pressure foot is raised before the auto thread cutting is complete. In order to troubleshoot this problem, simply lower the pressure foot. The LED light might also blink if thread gets stuck in the thread cutter mechanism so you will have to remove it.
2. Bobbin Thread Breaks
Another problem that you may experience with the Janome Memory Craft 6600 is that the bobbin thread might break. This usually happens when the bobbin thread is not threaded correctly into the bobbin holder or when lint has formed in the bobbin holder. Therefore, it’s important to remove any lint from your bobbin holder and make sure that you insert the bobbin thread correctly. You can always refer to your manual in order to get a better idea of how you can insert the bobbin thread.
3. Seam Puckering
Sometimes you might experience seam puckering whilst using the Janome Memory Craft 6600. This problem usually happens when the needle thread tension is too tight or when the machine is wrongly threaded. Therefore, you need to adjust the needle thread tension and make sure you thread your machine the correct way. Seam puckering can also occur when you use a wrong needle or when stitch length is too long for the fabric you are sewing. Therefore, always make sure that you use the correct needle and adjust the stitch length.
4. Needle Breaks
Another common problem that you might experience with the Janome Memory Craft 6600 is that the needle tends to break. This happens when you use the wrong needle or when the needle is blunt. So always ensure that the needle you use is compatible with the fabric you are sewing. Also ensure that the needle is not blunt before sewing anything. Improper installation of the needle can also cause it to break, so always make sure that you insert it correctly.
5. Thread Breaks
The thread placed on a Janome Memory Craft 6600 can sometimes break. This is usually caused by improper threading of the machine, improper thread tension or use of poor quality thread. In order to troubleshoot the problem it is imperative that you use quality threads and make sure you thread your machine properly. You should also adjust the thread tension. If the thread is tangled around the spool it will break so make sure that your thread is not tangled anywhere.
6. Machine Stops Working
The Janome Memory Craft 6600 has a problem of suddenly stopping. This usually happens when the thread gets caught up in the hook race or when the machine is not plugged in correctly. In order to troubleshoot the problem, always ensure that thread is not caught up in the hook race. You should also check all the connections to make sure that they are properly connected.
7. Noise On The Machine
The Janome Memory Craft 6600 has a problem of making strange noises especially when lint as built up inside the hook race or bobbin winder, or when thread has been caught up inside the hook race. In order to resolve this problem it is important that you get rid of the lint as well as the thread that might be tangled up.
8. Material Does Not Feed Smoothly
When using the Janome Memory Craft 6600 you might face incidences when the material or fabric does not feed smoothly into the feed dog. This usually happens when the feed dog is packed with lint or wen the stitches are too fine. In order to resolve the problem, always remove lint from your feed dog and adjust the stitches to make them longer.
9. Skipped Stitches
Sometimes the Janome Memory Craft 6600 has a problem of producing skipped stitches. This usually occurs when the needle is inserted incorrectly or when it is blunt. Therefore, you always need to ensure that you are using quality needles and make sure that you install them correctly. Use of a wrong needle or thread can also result in skipped stitches so make sure that you are using the correct needle and thread for your fabric.
How Long Should A Janome Sewing Machine Last?
A Janome sewing machine should last you up to 25 years if you are taking good care of it. For some users, the Janome machine can last them a lifetime. It is important that you regularly service your machine so that it lasts longer and remains in good condition.
Are Janome Sewing Machines Good Quality?
Yes, Janome sewing machines are good quality. They are actually considered as one of the best brands of sewing machines available on the market and they are very durable.
Conclusion
Janome has different types of sewing machines and the Memory Craft 6600 is actually one of their best models. It has sophisticated features and can be used for quilting. This machine is also durable so you will definitely be getting value for your money.