The Janome Memory Craft 9000 is a very popular sewing machine that offers a range of advanced features and functionalities. The Memory Craft line from Janome is one of quality and high-end features. However, even the best sewing machines can sometimes run into problems, and the Janome Memory Craft 9000 is no exception. This article seeks to take a closer look at some of these problems and hopefully provide some effective solutions to them. Here’s more on that.
Table of Contents
1. The Sewing Machine May Not Turn On
One of the most frustrating problems that you can have on the Janome Memory Craft 9000 is when the machine won’t turn on. Which is most often caused by a faulty power cord or an issue with the machine’s internal wiring. You see the Janome Memory Craft 9000 is indeed a computerized sewing machine but it has been around for quite some time, so it is not being produced by Janome. Instead what’s left are refurbished Janome Memory Craft 9000s with such underlying problems.
What You Can Do
- Be sure to check that the power cord is properly plugged into both the machine and the wall outlet/ socket. If the cord is loose, try unplugging it and plugging it back in again to ensure a secure connection. If the cord is damaged or frayed, you may need to replace it.
- If the power cord is not the issue, the next step is to check the machine’s internal wiring. This can be a bit more complicated, so it may be best to consult the machine’s user manual or contact a professional Janome technician for assistance.
- Another cause of the machine not turning on is a blown fuse. Most sewing machines have a built-in fuse that protects the internal components from power surges. If the fuse is blown, the machine will not turn on. To check the fuse, make use of the user manual for instructions on locating and replacing it. Or just take it in to your dealer for further assistance.
2. The Needle Threader Doesn’t Work As Well As It Should
The needle threader is a convenient and time-saving feature on the Janome Memory Craft 9000 that makes threading the needle quick and easy. However, if the threader is not working properly, it can be frustrating and time-consuming to thread the needle manually. A common cause of a needle threader not working is a bent or misaligned needle. Another possible cause of a malfunctioning needle threader is a dirty or damaged threader mechanism. It’s also possible that the needle threader is not properly aligned with the needle.
What You Can Do
- Check to make sure that the needle is straight and properly seated in the needle holder. If the needle is bent or misaligned, replace it with a new needle.
- To clean the threader mechanism, use a soft brush to remove any debris or lint that may be blocking the mechanism. If the threader mechanism is damaged, it may need to be replaced.
- To fix the issue with the needle threader’s alignment, consult the user manual for instructions on adjusting the alignment of the threader.
3. The Sewing Machine Has A Lot of Bobbin Thread Tension Issues
Problems with bobbin thread tension are a common occurrence with the Janome Memory Craft 9000. Most of these problems issue can include loose or uneven stitches on the bottom of the fabric you will be sewing on, as well as thread bunching or tangling. Bobbin thread tension issues are mostly due to an improperly wound bobbin. Or in some cases a dirty bobbin case full of debris or lint. It’s also possible that the bobbin tension itself is too loose or too tight.
What You Can Do
- To ensure that the bobbin is wound correctly, consult the user manual for instructions on winding the bobbin. Make sure that the thread is wound evenly and tightly onto the bobbin.
- To clean the bobbin case, remove it from the machine and use a soft brush to remove any debris or lint that may be blocking the tension spring.
- If the bobbin case is damaged, it may need to be replaced.
- To adjust the bobbin tension, you need a professional Janome technician because it is not something that you can do at home.
4. The Janome Memory Craft 9000 Is Prone To Making Strange Noises
If your Janome Memory Craft 9000 is making strange or unusual noises while you are using it, it’s important that you deal with the issue as soon as possible. Unusual noises can be a sign of a more serious problem with the Janome Memory Craft 9000, and ignoring the issue can lead to further damage or malfunction. A common cause of strange noises is a loose or damaged needle. Another possible cause of strange noises is a dirty or damaged bobbin case. It is also possible that the machine’s internal gears or components are worn or damaged.
What You Can Do
- Check to make sure that the needle is properly seated in the needle holder and that it is not bent or damaged. If the needle is loose or damaged, replace it with a new needle.
- To clean the bobbin case, remove it from the machine and use a soft brush to remove any debris or lint that may be blocking the tension spring. If the bobbin case is damaged, it may need to be replaced.
- If you are not confident in your ability to solve any of these problems then you need to consult a certified Janome technician.
- Also be sure to take your sewing machine in for servicing as regularly as you can to keep it working (sewing) as optimally as possible.
Conclusion
The Janome Memory Craft 9000 is a highly advanced (but sadly outdated) sewing machine that offers a range of features and functionalities. However, as stated in the introduction even the best sewing machines canencounter problems. The Janome Memory Craft 9000 is also a great sewing machine for beginners which makes it a great sewing machine according to some sewists’ standards.
