If you are thinking of purchasing the Nordictrack X32i treadmill you obviously need to know some of the challenges you may encounter whilst using it. Below we look at some of the most common Nordictrack X32i problems and how you can easily resolve them.
Table of Contents
What Is Nordictrack X32i?
Nordictrack X32i is a high tech treadmill that has a powerful motor and steeper incline. This treadmill has a 32 inch smart screen display, bluetooth and WiFi connections. It also has dual 3 inch fans in console and it doesn’t make any noise when you are using it. This treadmill is actually rated as one of the best treadmills available on the market.
Nordictrack X32i Problems
1. Belt Does Not Move
One of the problems which you may experience with a Nordictrack X32i treadmill is that the belt may refuse to move. This problem happens when any of the following things happen;
- The motor may be malfunctioning or dead.
- The belt tension may not be properly adjusted.
Troubleshooting Belt Does Not Move Problem
When you notice that the belt of your Nordictrack X32i is refusing to move you can try any of the following techniques in order to resolve the problem;
- Check if the motor is still in good condition and if it is not you can try to fix or replace it.
- Adjust the belt tension if it is not correctly adjusted.
2. Starting Problems
Another problem which you may encounter with a Nordictrack X32i treadmill is that it may refuse to start. This problem usually happens when any of the following factors are present;
- The power cord may be faulty or it may not be properly connected.
- The power outlet may not be working.
- Console display screen may be malfunctioning.
- Circuit breaker switch may have tripped.
- Fuse may be blown out.
Troubleshooting Starting Problems
If your Nordictrack treadmill is experiencing starting problems you can try any of the following techniques in order to resolve the issue;
- Check the power cord and ensure that it is properly connected into the mains power supply.
- Check if the mains power outlet is working. If it is not you will need to connect your treadmill to another power outlet.
- Fix the console display screen if it is malfunctioning.
- If the circuit breaker has tripped you need to switch it back on.
- Replace a blown out fuse with a new one.
3. Burning Smell
Another problem which you can face with a Nordictrack X32i treadmill is that it may start to produce a burning smell. This usually happens when any of the following occur;
- There might be friction between the belt and the deck.
- There might be a power surge that is causing a short in the motor, wiring or electronics.
Troubleshooting Burning Smell Problem
NB: this problem can result in fires if left unresolved therefore, if your treadmill is producing a burning smell you should discontinue using it until the problem has been resolved.
When you notice that your Nordictrack X32i treadmill is producing a burning smell you can try any of the following methods in order to try and resolve the issue;
- If there is too much friction between the belt and the deck you will need to lubricate your machine or alternatively adjust the tension of your belt.
- Check if there is a power surge on your treadmill and then try to resolve it.
4. Belt Slips
Another problem which you may encounter on the Nordictrack X32i treadmill is that the belt may slip. This problem occurs when any of the following factors are present;
- The belt may have too much lubrication.
- The belt may be too tight.
Troubleshooting Belt Slips Problem
If the belt of your Nordictrack X32i treadmill is always slipping when you are using it, you can try the following techniques in order to solve the issue;
- Remove any excess lubrication from your belt.
- Adjust the tension of your belt such that it is not too tight.
5. Belt Jumps Or Sticks When Running
The belt of a Nordictrack X32i can sometimes jump or stick when you are on the treadmill. This problem is caused by the following;
- Tension may not be properly adjusted.
- Belt may not be lubricated.
Troubleshooting Belt Jumps Or Sticks When Running Problem
If the belt of your Nordictrack X32i jumps or sticks when you are running on the treadmill you can try the following methods in order to curb the issue;
- Adjust the tension of your belt.
- Lubricate your belt.
6. Inconsistent Speed
When you are using a Nordictrack treadmill, the speed can become very inconsistent. This usually happens when;
- The belt may be worn out or faulty.
- The motor may be faulty.
- There might be a problem with the circuit breaker.
Troubleshooting Inconsistent Speed Problem
If you notice that your Nordictrack treadmill is moving at inconsistent speeds you can try the following in order to resolve the issue;
- If the belt is worn out you need to replace it with a new one however, if it is faulty you will need to just fix or adjust it.
- Check the circuit breaker and ensure that it is working.
Causes Of Nordictrack X32i Problems
Poor Maintenance
One of the main causes of Nordictrack X32i treadmill problems is poor maintenance of the treadmill. If you are someone who does not regularly lubricate your treadmill, it will definitely develop most of the problems indicated above. If you are someone who also does not pay attention to the condition of their treadmill, you will also find yourself experiencing these challenges. Therefore, it is important that you regularly check and service your treadmill.
Wear And Tear
Another cause of Nordictrack X32i treadmill problems is wear and tear. All treadmills including the Nordictrack X32i are prone to wear and tear. Therefore, it is important that you replace worn out parts with new ones in order to avoid these problems.
Conclusion
Nordictrack X32i treadmills are one of the best treadmills you will find on the market. While they may seem problematic, it is important to note that the challenges they usually face are easy to resolve.