Maytag MVWC565FW1 Problems : 6 Common Issues (Explained)

Maytag MVWC565FW1 Problems

Almost every washer has its problems and the Maytag MVWC565FW1 is no exception. The article below indicates some of the common Maytag MVWC565FW1 problems and how you can easily troubleshoot them at home.

Table of Contents

What Is Maytag MVWC565FW1?

Maytag MVWC565FW1 is a washer that has a deep water wash option, deep rinse option and a wrinkle control option. This washer uses sensing technology to adjust water levels during each washing cycle. The Maytag MVWC565FW1 is highly durable and can last for years without needing any repairs.

Maytag MVW565FW1 Problems

NB: When you purchase a Maytag washer, all the parts will be intact and it will be functioning properly. The problems indicated in this article are mainly influenced by wear and tear or human error.

1. Washer Not Cleaning Or Removing Stains

One of the most popular problems noted by users of the Maytag MVWC565FW1 is that the washer sometimes fails to clean or remove stains on clothes. This problems is caused by a number of factors as indicated below;

  • You added too much water to the washer.
  • Too many clothes were added into the washer.
  • Detergent was placed on top of the load of clothes.
  • Using the wrong detergent.
  • Using wrong cycle for your fabric.

Troubleshooting Washer Not Cleaning Problem

If your Maytag MVWC565FW1 is not removing stains on your clothes, here are a few troubleshooting techniques that you can use.

  • Do not add more water to the washer since the Maytag MVWC565FW1 can sense load size and adjust the amount of water needed in order to clean the clothes.
  • Put clothes or garments in batches into the washer. You can separate them by colors to make your job easier.
  • Always place detergent into the bottom of the basket and not on top of the clothes.
  • Always use the correct detergent when placing clothes in the washer.
  • Always use power wash cycle when cleaning clothes that have tough stains.

2. Load Not Rinsed

Another problem which you may experience with the Maytag MVWC565FW1 is that the load may come out not rinsed. This problem is usually caused by the following factors;

  • Poor water supply.
  • Use of too much detergent.
  • Too many clothes placed in washer.

Troubleshooting Load Not Rinsed Problem

If you notice that your clothes were not properly rinsed by the Maytag MVWC565FW1 here are a few techniques you can use to troubleshoot the problem.

  • Check water supply and ensure that both hot and cold water can enter the washer.
  • Try using less detergent next time.
  • Try reducing the amount of clothes you place in the washer.

3. Washer Not Draining Or Spinning

Another common problem with the Maytag MVWC565FW1 is that the washer sometimes does not drain or spin clothes. This usually results in clothes remaining wet or stained. Below are some of the factors that can cause this problem.

  • Small items may be caught in the pump or between basket and tub thus slowing the draining process.
  • You may be using a cycle that as a low spin speed which means water will take more time to drain.
  • Too many clothes may be packed tightly into the washer thus making it harder to spin or drain water.

Troubleshooting Washer Not Draining Or Spinning Problem

  • If you are washing smaller items, place them in garment bags so that they do not get caught in the pump as this can restrict water from moving out of the washer.
  • Use the recommended or correct spin speed for your garments. In order to remove excess water from your garments, press drain or spin.
  • Put a limited amount of clothes into the dryer and make sure they are evenly arranged.

4. Washer Does Not Run

The Maytag MVW565FW1 may refuse to run and this problem is usually caused by a number of factors. Some of them include;

  • Poor water supply.
  • Poor electricity supply.
  • Too many garments placed inside the washer.

Troubleshooting Washer Does Not Run Problem

  • Check water supply to see whether both hot and cold water are entering into the washing machine.
  • Check the power outlet supply and ensure that it is working. Avoid using an extension cord.
  • Limit the amount of garments you place inside the washer.

5. Washer Vibrates

Another problem that you may experience with the Maytag MVWC565FW1 is that it might start vibrating. This problem is usually caused by the following reasons;

  • Washer may not be level.
  • Load may be unbalanced inside the washer.

Troubleshooting Washer Vibrating Problem

  • Check whether the washer is sitting correctly on the floor, pay attention to bumps on the floor.
  • Wash clothes in batches to avoid having an unbalanced load in the washer.

6. Water Leaks

You may also experience water leaks with the Maytag MVWC565FW1. This may be caused by reasons like;

  • Washer not level.
  • Loose drain hose connection.
  • Loose fill hose connections
  • Washer loaded wrongly.

Troubleshooting Water Leak Problems

When troubleshooting water leak problems in a Maytag MVWC565FW1 you can use the following guidelines;

  • Level the washer so that water may not leak from inside.
  • Tightly secure the drain hose connection to the drain pipe or laundry tub.
  • Tighten fill hose connection.
  • Load washer correctly, you can always refer to the manual for guidelines.

What Are Common Problems With Maytag Washers?

There are different Maytag washers on the market, but some users have noted recurring problems amongst these machines. Some of the problems are listed below.

  • Washer does not spin.
  • Washer makes noises.
  • Water leaks.
  • Washer vibrates.
  • Washer does not drain water.

Why Is My Maytag Washer Leaving Clothes Soaking Wet?

Your Maytag washer may be leaving clothes soaking wet because it is not draining water properly. Therefore, you need to check the cycle speed you are using to clean your clothes. You can also click the drain or spin button in order to get rid of water from your clothes.

Conclusion

The Maytag MVWC565FW1 is an amazing washer to own regardless of the problems it may succumb to in the future. It is worth pointing out that every washer as its flaws and it is important to do a bit of research before settling for a specific brand.