JCB is one of the first companies to introduce the teleskid. This is a highly sophisticated skid steer loader and compact track loader that has a telescopic boom. The JCB teleskid is able to dig deeper than any other skid steer available on the market and it is also very durable. However, in as much as the JCB teleskid has so many advantages associated with it, there are some challenges it usually faces. Below we discuss some of the most common JCB teleskid problems and how you can resolve them.
Table of Contents
JCB Teleskid Problems
NB: The JCB teleskid is sold without any malfunctioning parts and the problems indicated below are usually influenced by wear and tear or human error.
1. Starting Problems
One of the problems which you may experience with a JCB teleskid is that it may refuse to start. This problem happens when any of the following things occur;
- The fuel filters may be dirty.
- The fuel line may be blocked.
- Throttle cable may not be connected properly.
- There might not be any fuel in the teleskid.
Troubleshooting Starting Problems
If you are experiencing starting problems in your JCB teleskid you can try implementing the following techniques in order to resolve the issue;
- Clean fuel filters if they are dirty.
- Clean the fuel line and ensure that it is not blocked.
- Check throttle cable and ensure that it is connected properly.
- Check fuel levels and replenish if it is low.
2. Engine Overheats
Another problem which you may experience with a JCB teleskid is with the engine. It tends to overheat and this problem usually occurs when any of the following things happen;
- The fuel pump may be faulty.
- There might be little to no engine coolant in your tractor.
- Air filter may be plugged.
- Radiator may be clogged.
- Carburetor may be clogged or damaged.
- Exhaust valves may be damaged.
Troubleshooting Engine Overheats Problem
When you notice that the engine of your JCB teleskid is constantly overheating, here are a few ways in which you may try to resolve the problem;
- Check the fuel pump to ensure that it is in good condition. If it’s not you will have to fix or replace it.
- Clean the air filter and remove any dirt or debris. If the air filter is damaged you need to replace it.
- Clean the radiator if it is dirty.
- Check carburetor and clean it if clogged, but if damaged please replace it.
- Check exhaust valves and replace if they are damaged.
3. Smoking Problems
The JCB teleskid can start smoking excessively and this is a clear sign that something is not right. Excessive smoking is usually caused by any of the following;
- The fuel injector may be blocked.
- The solenoid may be worn out or damaged.
- There might be too much oil in your tractor.
- Your fuel may be contaminated.
Troubleshooting Smoking Problems
When you notice that your JCB teleskid is smoking excessively, you can try any of the following techniques in order to resolve the problem;
- If the injector is blocked you need to have it cleaned.
- Replace solenoid if it is worn out or damaged.
- Drain excess oil from your engine.
- If fuel is contaminated you need to drain it and replace it with clean fuel.
4. Poor Engine Performance
The engine of a JCB teleskid can start stalling and this problem happens when any of the following things happen;
- Air filter may be clogged.
- Exhaust pipe may be clogged.
- Ignition timing may be wrongly set.
- Spark plug may be faulty.
Troubleshooting Poor Engine Performance Problem
When you notice that the engine of your JCB teleskid is stalling you can try any of the following in order to resolve the problem;
- If the air filter is clogged you need to clean it.
- Clean exhaust pipes if they are clogged.
- Adjust the ignition timing if it is wrongly set.
- Fix and replace spark plugs if they are faulty.
5. Engine Does Not Crank
The engine of your JCB teleskid may not crank when you are trying to start it. This problem may occur because of the following factors;
- You may have added the wrong type of fuel into the tank.
- Fuel pump drive may be faulty.
- Fuel injection timing may be wrongly set.
Troubleshooting Engine Does Not Crank Problem
If you notice that the engine of your JCB teleskid is not cranking when you are trying to start the tractor you should try any of the following techniques in order to resolve the problem;
- Check whether you have added the correct fuel into your tank. If you had not you should drain it and replace it with the correct fuel.
- If the fuel pump is faulty you need to replace it.
- Adjust the fuel injection timing if it is wrongly set.
Causes Of JCB Teleskid Problems
Poor Maintenance
One of the main causes of JCB teleskid problems is poor maintenance of the machine. If you do not regularly check the engine of your teleskid or pay attention to its performance there is a good chance that it will start facing most of these problems. If you also fail to service it regularly it will develop most of these problems.
Wear And Tear
Another cause of JCB teleskid problems is wear and tear of the machine. If there are any components that are worn out there is a good chance that your machine will start developing most of these problems.
How High Can A JCB Teleskid Lift?
The JCB teleskid can lift up to 13 feet and 3 inches. So if you are looking for something along these lines you should definitely consider this brand.
Conclusion
Finding the best teleskid can be a cumbersome task, luckily JCB has developed a variety of teleskids to meet your needs. It is worth noting that most of the problems indicated in this article can easily be avoided by regularly servicing and maintenance of the teleskid. Should you come across any of the problems indicated in this article, its best to use the troubleshooting guide above in order to try and resolve the issue.