Cub Cadet mowers have surely made a name for themselves in the lawn mower business but, just like any other mower you will find out there they have their problems. The article below highlights the Cub Cadet electric clutch problem and how you can troubleshoot it at home.
Table of Contents
Causes Of Cub Cadet Electric Clutch Problems
One of the reasons why your Cub Cadet electric clutch is not working is either because the electric clutch is not getting enough power supply or because it is worn out and needs to be replaced. Other popular reasons include the fact that clutch solenoid might be defective or the electric clutch was wrongly installed. However, whatever the reason might be there are a few ways in which you can troubleshoot a Cub Cadet Electric clutch problem as listed below.
Cub Cadet Electric Clutch Troubleshooting
In order to troubleshoot the electric clutch problems of a Cub Cadet mower you need to have a few tools at your disposal. These tools include a digital multimeter, mechanical tool box, safety goggles, gloves and 2 ton chain hoist.
NB: Troubleshooting a Curb Cadet electric clutch can be very hazardous especially if you do not have the right experience. Therefore always make reference to your manual before trying to troubleshoot your Cub Cadet mower.
Step 1- Inspecting The Electric Clutch
When troubleshooting a Cub Cadet electric clutch the first thing that you need to do is to pull the switch from the dash of your Cub Cadet. The next thing is to turn on the key and you will hear a click sound of the fuel solenoid at the bottom of the carburetor. Once you have done that you need to pull the electric clutch or PTO of the Cub Cadet and see if it is responding or not.
Step 2- Test Electric Clutch With Digital Multimeter
If the electric clutch of your Cub Cadet has not responded the next thing you need to do when troubleshooting an electric clutch is to test the switch using a digital multimeter or voltmeter. In order to do this, set the multimeter or voltmeter to continuity. Connect the switch to the multimeter or voltmeter and then test whether it has continuity or not. If it has continuity you should open the switch and test it again. Test also the middle part of the switch to see if there is continuity. If there is no continuity within the switch that means you have to mount and remove the Cub Cadet electric clutch/ PTO.
Step 3- Mount And Remove Electric Clutch
If there is no continuity within the switch the next option is to mount and remove the electric clutch. In order to do this you have tilt your Cub Cadet mower upwards using a 2 ton chain hoist so that you can easily access the bottom of your lawn mower. The next thing is to disconnect the electric clutch or PTO switch. Clean the wires on the electric clutch and then test their resistance using a voltmeter, it should be between 2-4 ohms.
Step 4- Change Electric Clutch
If the electric clutch does not have any resistance you should replace it with a new one. In order to replace an electric clutch simply buy a new one and install it where the old electric clutch was.
Why Won’t My PTO Engage In Cub Cadet?
One of the reasons why your PTO will not engage in Cub Cadet is because the clutch is not getting enough power or the clutch is damaged and needs to be replaced. Another reason why your PTO might not be engaging is because of aggressive use or owner’s misuse. Minor reasons why your PTO will not engage are mainly because the PTO switch was not installed correctly, therefore you just need to fix it in order to solve the problem.
Why Won’t Blades Engage On My Cub Cadet?
If the blades of your Cub Cadet are not engaging it could be that your battery is weakly charged or the battery of your Curb Cadet is dead and needs to be replaced.
How Do I Know If My Lawn Mower Clutch Is Bad?
If your lawn mower clutch is bad, your PTO might engage and then stop right away. Furthermore, the PTO might fail to engage at all and this can be a huge problem.
How To Engage PTO In Cub Cadet?
In order to engage PTO in Cub Cadet you need to push the blade or PTO lever forward into the ON position. This will automatically cause the mower to engage the PTO. When you do this you will hear a click sound which is confirmation that the PTO is in good condition. If this does not happen that means there is a problem with your lawn mower and you need to have it fixed.
Why Does My Mower Sputter When I Engage The Blades?
You mower sputters when you engage the blades because the carburettor is clogged or there is water present in the fuel tank. It could also be the fact that your air filter is clogged or there is a faulty spark plug. Therefore, you need to inspect your lawn mower and fix any of these problems. If the problems persist seek help from a qualified repairer.
Why Won’t My Riding Mower Cut The Grass?
One of the reasons why your riding mower will not cut the grass is because the drive belt is broken or worn out and as a result it doesn’t spin the blades. In order to solve this problem you have to replace the drive belt with a new one. Another reason why your riding mower might not be cutting grass is because the blades are dull and need to be sharpened.
Troubleshooting an electric clutch of a Cub Cadet lawn mowers is an easy task especially when you follow the steps provided in this article. It is worth highlighting that although, Cub Cadet mowers face electric clutch problems overtime but, they are still good lawn mowers that cut grass effectively and efficiently, so do not be disheartened if you are looking to buy a Cub Cadet lawn mower.