Cub Cadet is known for producing quality mowers but, this doesn’t mean these mowers do not succumb to problems in the future. The article below highlights some of the ignition switch problems that your Cub Cadet might face and how you can solve them.
Table of Contents
Cub Cadet Ignition Switch Problems
NB: Cub Cadet lawn mowers are sold with fully functional ignition switches and the problems listed below develop as a result of wear and tear.
Cub Cadet does not turn over or start
This is one of the most prominent problems of the Cub Cadet which is caused by a faulty ignition switch. If you place your key in the Cub Cadet and you try to start the engine but it does not turn or start then this means the ignition switch is faulty or completely damaged. This problem usually occurs when the ignition switch has experienced wear and tear and needs to be replaced.
How To Solve Cub Cadet Ignition Switch Problems
If your Cub Cadet has an ignition switch problem, the first thing you need to do is to take a multimeter and use it to test the resistance of your ignition switch. A good ignition switch should measure resistance which is close to 0 ohms whilst a bad ignition switch will measure infinite resistance. If the ignition switch is damaged the only way to fix it is to replace it with a new one. This means you will have to disassemble the damaged ignition switch and replace it with a new one. If you are not familiar with the process then the best option would be to take the Cub Cadet mower to a reputable repairer.
How To Avoid Cub Cadet Ignition Switch Problems
The best way to avoid Cub Cadet Ignition switch problems is to regularly service your lawn mower. This will help to ensure that any problems within the ignition switch are diagnosed and attended to earlier rather than later. When servicing a Cub Cadet make sure that you take it to a reputable repairer.
What Would Cause A Cub Cadet Lawn Mower Not To Start?
A faulty ignition switch is not the only reason why a Cub Cadet will not start. Below are some of the reasons which can be influencing your Cub Cadet not to start.
Bad Battery
One of the reasons why your Cub Cadet might not be starting is because it has a bad battery. In order to solve this problem you need to replace the battery with a new one so that your lawn mower can be able to start efficiently and effectively.
Empty Fuel Tank
Another obvious factor which is often ignored by many is that the fuel tank might be empty and that is why the Cub Cadet will not start. In order to solve this problem you simply have to add fuel into the tank of your lawn mower before switching it on.
Bad/ Spoiled Fuel
Your Cub Cadet will not start because there is bad or spoiled fuel in the lawn mower tank. In order to solve this problem you have to drain out all the bad fuel and replace it with fresh fuel. It is worth noting that when you store fuel in the tank of your lawn more for more than 30 days it will start to turn bad. Therefore, you will need drain it.
Clogged Air Filter
The air filter is responsible for sending air into the engine. However, when it becomes clogged, it won’t be able to function thus causing the engine to overheat. In order to solve this problem you have to clean the air filter or replace it with a new one if it is damaged beyond repair.
Bad Fuse
The Cub Cadet will not start if there is a bad or blown out fuse. In order to solve this problem you have to replace the damaged fuse with a new one.
Clogged Fuel Line
Another common reason why your Cub Cadet might not be starting is because the fuel line is blocked. In order to solve this problem you have to clean the fuel line of your lawn mower.
Will Mower Start With Bad Solenoid?
The chances of your mower starting with a bad solenoid are very slim. Therefore, you need to replace the damaged or bad solenoid with a new one.
What Are The Symptoms Of A Bad Solenoid On A Riding Lawn Mower?
When a solenoid has gone bad usually the lawn mower faces difficulty in starting or the engine shuts off for no reason. Another sign that your solenoid has gone bad is when your lawn mower hesitates to accelerate especially when you are moving uphill. In order to solve these problems its best to replace the solenoid with a new one.
When I Turn The Key In The Ignition Nothing Happens?
When you turn the key in the ignition and nothing happens it means that your ignition switch is faulty. Therefore, you need to test it using a multimeter. If the resistance is infinite or more than 0 ohms that means it’s damaged and needs to be replaced with a new one.
Will A Spark Plug Cause A Lawn Mower Not To Start?
Yes, a faulty spark plug will cause a lawn mower not to start. This is because the spark plug is important for transmitting energy to other parts of the lawn mower and it cannot do so if it is damaged. Therefore, you have to either repair the spark plug or replace it with a new one so that the lawn mower can start.
What Happens If The Fuel Mixture Is Too Rich?
If the fuel mixture is too rich there is a chance that the carburetor and other parts of your lawn mower will get clogged or damaged. Therefore, always make sure that the fuel you use is not too rich.
Conclusion
Cub Cadet Ignition problems are easy to solve as indicated in the above article. Remember to take your Cub Cadet lawn mower for service regularly in order to reduce its rate of wear and tear.