Massey Ferguson tractors are designed with power users in mind, these include commercial operators, growers and contractors. The Massey Ferguson 1835M tractor is no exception to this norm. The tractor is very robust, versatile and easy to use, hence the preferred choice for most tractor owners. The tractor packs a lot of useful features in a very compact build hence can serve the needs of a lot more people. It is however not perfect and can develop problems and these will be discussed down below in this article.
Table of Contents
What Is The Massey Ferguson 1835M?
The Massey Ferguson 1835M is remarkable tractor offering from the manufacturer Massey Ferguson which is a part of AGCO. The tractor uses a 1.8L 3-cycle Iseki diesel engine that produces 36.2 HP (27.0 KW) and a 4 MFWD 4WD chassis for greater performance. The tractor is also equipped with a 12-speed power shuttle hydrostatic transmission for greater power delivery hence allowing the tractor to handle greater loads. To bring the tractor to a standstill a wet disc brake system is used.
Massey Ferguson 1835M Problems
NB: The Massey Ferguson 1835M tractor is usually sold without any defects. Any problems that may develop on the tractor, including those highlighted down below in this article are usually caused by misuse of the tractor or wear and tear arising while the tractor is being used.
1. Engine Difficult To Start
The Massey Ferguson 1835M uses an Iseki 1.8L 3-cyl diesel engine and normally the engine operates fine as intended, however if the starts having difficulty in starting or fails to start at all the problem could be caused by;
- Clogged or faulty fuel injection nozzles.
- Broken fuel injection pump.
- Dirty fuel filter or air being caught in the fuel system.
Troubleshooting Engine Difficulties
When the Massey Ferguson 1835M starts exhibiting problems with the engine the following can be done to try and address the problems;
- Regularly checking the fuel injection nozzles and if they are clogged or damaged beyond repair, they may need to be replaced.
- Rebuilding or replacing the broken fuel injection pump.
- Servicing the air filter to remove dirt and replacing it when it is overly damaged. Also ensure to bleed the fuel system if it contains any air.
2. Engine Overheating
The Massey Ferguson 1835M tractor engine requires an ideal temperature to operate normally hence when it starts overheating several problems could result. Reasons for the Massey Ferguson 1835M engine to overheat are;
- The engine radiator fins being clogged or the radiator cap being damaged.
- Insufficient coolant circulating in the engine cooling system.
- Slipping or worn fan belt and also insufficient engine oil circulating around the engine.
Troubleshooting Engine Overheating
When the engine starts over heating the problem can be addressed by;
- Cleaning the Massey Ferguson 1835M radiator of any dirty and also replacing the defective radiator cap.
- Adding more coolant until it reaches the desired level and also checking for any faults present in the system that need to be attended too.
- Replacing the slipping fan belt when it starts slipping or is defective and also refilling the engine oil level to the proper level.
3. Difficulty When Shifting Gears
Gears are important since they allow one to switch between the various driving speeds, hence they need to be in good condition to perform well. Reasons for the difficulty when shifting gears include;
- Gear shift linkage being worn or rusty.
- The clutch being worn or improperly adjusted.
- Worn or bent shift forks and also other worn parts in the gear shifting mechanism.
Troubleshooting Gear Shifting Difficulties
In order to address problems associated with gear shifting, the following steps can be taken;
- Installing a new gear shift linkage when the present one is excessively worn or rusty.
- Adjusting the clutch to the correct position or replacing the clutch unit when it’s past its useful life.
- Changing the worn shift forks and also replacing any other worn or damaged parts in the gear shifting mechanism to restore smooth operation.
4. Transmission Oil Leaks
The transmission is necessary for transmitting power and is often sealed; hence it should not be leaking any oil. When the transmission starts leaking oil, the problem can be caused by;
- Transmission fluid return pipe being clogged.
- Seals and gaskets being worn.
- Internal transmission case pressure being excessively high.
Troubleshooting Transmission Oil Leaks
When the transmission starts leaking oil, one can do the following steps to try and address the problem;
- Cleaning or changing the transmission fluid return pipe.
- Installing new seals and gaskets when the present ones are worn or defective.
- Changing any defective components in the transmission case that are causing the high internal pressure.
5. Jerky Hitch Lifting And Lowering
The hitch is designed to carry a great amount of load, and do so very easily and smoothly, however over time it may start being jerky when lifting or lowering. This may be caused by;
- Hydraulic fluid being contaminated hence not flowing smoothly.
- Failure of the hydraulic pump or air being trapped in the hydraulic system.
- Defective hydraulic spool valve or defective hydraulic cylinder.
Troubleshooting Jerky Hitch Movement
When the lifting and lowering of the hitch becomes jerky, the problem can be attempted to be solved by;
- Changing the contaminated hydraulic fluid.
- Repairing or replacing the hydraulic pump when defective or bleeding air from the hydraulic system
- Repairing or replacing the defective hydraulic spool valve along with the hydraulic cylinder when it becomes defective.
6. Excessive Play In Steering
The steering is very crucial in driving the tractor hence if the develops problems one cannot easily maneuver the tractor. Reasons for excessive play in the steering include;
- Worn steering column shaft or coupling.
- Defective hydraulic steering pump or loose or worn steering linkage components.
- Wear or malfunction of the steering control valve.
Troubleshooting Excessive Steering Play
To solve the problem of excessive play in the steering, one can try out the following;
- Regularly checking and replacing the defective steering column shaft or coupling.
- Checking the hydraulic steering pump and replacing when its past its useful life. One should also ensure they repair or replace the steering linkage when loose or defective.
- Regularly inspecting and replacing the steering control valve when it has malfunctioned or is worn out.
How To Avoid Massey Ferguson 1835M Problems?
The best way to avoid any problems developing with the Massey Ferguson 1835M is to regularize with the tractor’s operator manual and only using the tractor as advised in the manual. Also avoid overloading the tractor or using it in an environment where it might be damaged such using it on excessively muddy ground where it may fail to gain traction.
How Much Does a Massey Ferguson 1835M Cost?
The tractor may cost around $32,800 depending on where it is bought. The 2022 Massey Ferguson 1835MH 35 HP for example costs $32,456 on sites like www.kiperts.com. The 2022 Massey Ferguson 1835M Mech costs $32,800 on sites like https://easttnatv.com.
What Is The Lift Capacity Of The Massey Ferguson 1835M?
The tractor delivers 34 HP with a rated engine speed of 2,600 RPM. The tractor contains a 3-point power lift with a lift capacity of 2,205 lbs.
Conclusion
In conclusion the Massey Ferguson 1835M is a very powerful and robust offering from the manufacturer Massey Ferguson. The tractor packs a lot of power in a very compact and user-friendly build. The tractor is however not perfect and can develop problems when it is being used, hence regular maintenance is necessary to ensure the tractor functions as intended.
