Finding the perfect round baler that meets your needs can be hard thing. If you are thinking of purchasing the Massey Ferguson 1745 round baler you obviously need to know some of the problems it may experience so that you can have a rough idea of how to resolve them should the need arise.
Table of Contents
What Is Massey Ferguson 1745 Round Baler?
A Massey Ferguson 1745 round baler is a hay baling system or bundling system that picks hay from the ground and feeds it into the bale chamber. The Massey Ferguson 1745 round baler comes with a two cylinder density system and it has a hydraulic tension. This round baler is also very easy to maintain and use.
Massey Ferguson 1745 Round Baler Problems
NB: The Massey Ferguson 1745 round baler is sold without any malfunctioning or defective parts and the problems listed below are usually influenced by wear and tear experienced by the machine or by human error.
1. Bales Are Loose
One of the most common problems which you may experience with a Massey Ferguson 1745 round baler is that the bales may come out too loose. This problem usually occurs when you use the improper density setting or when you have worn out belts on the machine. Use of improper ground speed may also cause this problem. In order to resolve the issue, you need to ensure that you adjust the density setting based on whether you are baling straw, silage or hay. You should also replace the belts if they are worn out or damaged. Lastly, reduce your ground speed in order to ensure that you do not get loose bales.
2. Pickup Head Clogged
The Massey Ferguson 1745 round baler usually experiences problems with its pickup head that usually gets clogged. The pickup head gets clogged if you are using high ground speed or if the windrows are very large. The hitch pin may also clog the pickup head if it is not locked in its correct position. In order to troubleshoot the problem, you should reduce the ground speed and also the size of windrows. You should also ensure that the hitch pin is locked in place so that it doesn’t clog your pick up head.
3. Belt Malfunctions
Another problem which you may experience with a Massey Ferguson 1745 Round Baler is that the belt may malfunction. In most cases the belt stops spinning and this usually prevents the hay from being stacked into bales by the machine. This problem usually occurs when the tension of the belt is not set correctly or when the belt is worn out. In order to troubleshoot the problem, it is important that you adjust the tension of your belt if it is wrongly set. If the belt is worn out you will need to have it replaced with a new one.
4. Twine Does Not Work
The twine of a Massey Ferguson 1745 Round Baler may refuse to work. This problem usually occurs when you do not have any twine left in the machine or if the twine is not tracked properly. Use of wrong twine can also cause this problem. In order to try and resolve the problem you should start by checking whether there is enough twine in your machine. You should also check whether twine is correctly placed into the machine and also ensure that you place the correct twin into the machine.
5. Hay Leaks From The Machine
Another problem which you may experience with the Massey Ferguson 1745 Round Baler is that hay might start leaking from the sides of the baler. This problem usually occurs when you do not trap your hay correctly or when you are not using enough twine around your bales. In order to resolve the problem you should make sure you use enough twine when you are trapping your hay in the baler.
6. Baler Does Not Work
The Massey Ferguson 1745 Round Baler can start but refuse to work. This problem usually occurs when the slip clutch is slipping or when there are blockages or loose chains within the round baler. In order to troubleshoot the problem you need to ensure that the clutch is not worn out. If it is worn out you will need to replace it with a new one. You also need to check for blockages or stuck chains and bearing and then remove them so that your baler may start working.
How To Avoid Massey Ferguson 1745 Round Baler Problem
If you want to avoid Massey Ferguson 1745 problems, you need to ensure that you maintain and service your round baler regularly. This helps to ensure that you can identify problems before they emanate into bigger problems. If you notice that something is not right with your round baler, its best to take it to a reputable repairer to have it checked out before the problem becomes worse.
How Many Horsepower Does A Massey Ferguson 1745 Round Baler Need?
The Massey Ferguson 1745 round baler has a horsepower of 40hp. This round baler is very durable and can last you a lifetime.
What Is The Easiest Round Baler To Use?
The Massey Ferguson is one of the easiest round balers to use. It is a low maintenance machine and it comes at a reasonable price. If you are looking for a round baler to purchase it is best to consider the Massey Ferguson 1745 round baler.
Where Are Massey Ferguson Round Balers Made?
Massey Ferguson round balers are made in the U.S. They are very durable and you will actually be getting value for your money when you purchase them.
The Massey Fergusson 1745 may sound like a problematic round baler however, it is actually one of the best round balers you will find on the market. It comes with sophisticated features and it is also very durable. If you are thinking of purchasing this machine, do not let this article derail you from doing so. The problems indicated in this article can be avoided if you maintain and service your machine regularly.