Karcher is known for producing quality floor cleaners however, even the best brands can sometimes produce products that tend to develop problems overtime. Below we look at some of the most common problems experienced by floor cleaners specifically the Karcher FC3.
Table of Contents
What Is Karcher FC3?
Karcher FC3 is a cordless hard floor cleaner that has a rechargeable lithium ion battery and a 2 tank system. This cordless hard floor cleaner can remove tough stains and has rollers that are machine washable. Karcher FC3 cordless floor cleaner can clean any hard floors like wood, stone, tiles or vinyl. It is also very durable and has a battery life of about 20 minutes per each cleaning session.
Karcher FC3 Problems
1. Starting Problems
You may experience starting problems with a Karcher FC3 hard floor cleaner. This problem is usually caused by the following;
- The battery may be low.
- The charging cable may still be connected to the machine.
Troubleshooting Starting Problems
When you experience starting problems with your Karcher FC3 hard floor cleaner you should do the following in order to resolve the problem;
- Recharge the battery if it is low.
- Check and ensure that the charging cable is not connected to the machine.
2. Poor Cleaning Results
A Karcher FC3 hard floor cleaner can sometimes produce poor cleaning results when you are using it. This problem is usually caused by the following;
- The rollers may be dirty.
- You may have added the wrong detergent or incorrect dosage.
- The rollers may not be sufficiently moistened.
Troubleshooting Poor Cleaning Results Problem
If your Karcher FC3 is not cleaning your floors properly you should try the following techniques in order to resolve the problem;
- Clean rollers if they are dirty.
- Use only Karcher detergent and ensure that you are using the correct dosage.
- Moisten the rollers by moving them back and forth on the same position.
3. Rollers Do Not Turn
The rollers of your Karcher FC3 can sometimes refuse to turn. This problem usually occurs when any of the following things happen;
- The rollers may be blocked.
- The rollers may not be properly screwed onto the machine.
- The floor head cover may not be seated properly.
Troubleshooting Rollers Do Not Turn Problem
When the rollers of your Karcher FC3 hard floor cleaner refuse to turn you should try the following methods in order to resolve the problem;
- Remove any dirt or obstacles that may be vlocking the rollers.
- Ensure that the rollers are properly screwed in as far as they can go onto the roller holder.
- Check and ensure that the floor head cover is properly installed onto the machine.
4. Machine Does Not Suck Up Dirt
The Karcher FC3 hard floor cleaner can sometimes face challenges in sucking up dirt. This problem mainly happens when the following things take place;
- There might not be any water in the fresh water tank.
- Cleaning rollers may not be fitted properly.
- Fresh water tank may not be fitted properly.
- Cleaning rollers may be dirty.
- Rollers may be worn out.
- You may have forgotten to add detergent.
- Floor head cover may not be installed properly.
Troubleshooting Machine Does Not Suck Up Dirt Problem
When your Karcher FC3 hard floor cleaner fails to suck up dirt you should try the following in order to resolve the problem;
- Refill the fresh water tank.
- Check and ensure that the cleaning rollers are properly fitted onto the machine.
- Ensure that the fresh water tank is fitted properly.
- Clean rollers if they are dirty.
- Replace rollers if they are worn out.
- Ensure that you have added Karcher detergent into the machine before cleaning.
- Install the foot head cover.
5. Waste Water Leaks
Waste water may start leaking from your Karcher FC3 hard floor cleaner and this problem is usually caused by the following;
- The waste water tank may be full.
- Waste water tank may not be properly fitted in the appliance.
Troubleshooting Waste Water Leaks Problem
When waste water leaks from your Karcher FC3 hard floor cleaner you should implement the following techniques in order to resolve the problem;
- Empty the waste water tank if it is full.
- Ensure that the water water tank is properly fitted into the appliance before using the machine.
6. Battery Does Not Charge
The battery of a Karcher FC3 hard floor cleaner can sometimes refuse to charge. This problem usually happens when the following things occur;
- The charger may not be connected into the mains power supply.
- The battery may be dead.
Troubleshooting Battery Does Not Charge Problem
When the battery of your Karcher FC3 hard floor cleaner does not charge you should try the following in order to help solve the problem;
- Check and ensure that the charger is connected to that mains power supply.
- Replace the dead battery with a new one.
How To Avoid Karcher FC3 Problems
If you want to avoid Karcher FC3 hard floor cleaner problems it is important that you ensure that the battery is always fully charged before and after every use. You should also ensure that all elements are installed properly onto the machine. If you suspect that something is wrong with your Karcher FC3 hard floor cleaner it is important that you discontinue using it until you have discovered the problem.
Can I Use Any Detergent With My Karcher Floor Cleaner?
It is recommended that you use the Karcher detergent cleaner when using a Karcher floor cleaner.
Why Is My Karcher Floor Cleaner Leaving Streaks?
Your Karcher floor cleaner is leaving streaks because you are using too much detergent. Therefore, it is advisable that you use the recommended amount of detergent when cleaning.
What Detergent To Use In Karcher Floor Cleaner?
You should use Karcher detergent when using a Karcher floor cleaner.
Conclusion
The Karcher FC3 hard floor cleaner may seem like a problematic floor cleaner but that is not even the case. The problems identified in this article do not happen regularly and they can easily be resolved. If you are thinking of purchasing this machine do not let this article derail you from doing so, you will definitely be getting value for your money.