If you are looking to buy a Bernina 880 Plus, it’s only fair that you know some of the problems it may face over time. The Bernina 880 Plus is a sophisticated sewing machine but, just like any other sewing machine on the market it may face problems of its own over time. Below we look at some of the most common Bernina 880 Plus problems.
Table of Contents
What Is Bernina 880 Plus?
The Bernina 880 Plus is a sophisticated sewing machine that contains a sewing and embroidery system. It also contains a sewing computer system that you can use to guide you during the sewing process. The Bernina 880 Plus has a software that can be updated once updates are made available. This sewing machine is very durable and can last you for more than 10 years without needing any repairs.
Bernina 880 Plus Problems
NB: Bernina 880 Plus machines are sold without any malfunctioning parts and the problems listed below are as a result of mishandling or wear and tear of the machine.
1. Updating Problems
Since the Bernina 880 Plus uses a software to run, the software usually requires updating which can be troublesome for most users. One of the reasons why a Bernina 880 Plus may refuse to update is because the USB stick is not recognized by the device. Therefore, make sure you use a Bernina USB stick for all your updates. Another reason why your sewing machine might refuse to update is because the update is blocked. In order to solve this problem you have to switch off the machine and then switch it back on before proceeding to update your machine as indicated on the display. Lastly, the sewing machine may fail to update the software because the update data is not identified. In most cases you have to unzip the update data before installing the updates.
2. Problem Adjusting Stitch Width
If you are not very familiar with the Bernina 880 Plus it can be very cumbersome for you to adjust the stitch width. In most cases this problem is caused when the machine was set automatically not to adjust the stitch width in the security settings. In order to solve this problem you need to deactivate this setting on the machine.
3. Needle Breaks
Another frustrating problem with the Bernina 880 Plus is that the needle breaks. This problem usually occurs when the needle is wrongly inserted into the machine or when the fabric is pushed or pulled. In order to solve this problem, make sure that you insert the needle correctly onto the sewing machine, you can even make reference to the manual when doing so. You should also avoid pulling fabric when you are sewing.
4. Stitch Problems
Just like any other sewing machine on the market, the Bernina 880 Plus also faces stitch problems. Skipped stitches and uneven stitch formations are the most common ones. These problems are caused by using poor quality needles, improper installation of the needle, poor needle to thread combination and unbalanced tension. In order to solve this problem you have to ensure that you are using Bernina quality needles. You should also ensure that you connect the needle properly onto the sewing machine, always make reference to the manual if you have doubts. Also ensure that the thread you are using can easily pass through the needle. Lastly you should ensure that you use thread that has the same weight for the upper and lower part of your sewing machine.
5. Display Not Active
The display of a Bernina 880 Plus usually goes blank. This problem usually occurs when calibration data is incorrect or when the eco-function setting is active. In order to troubleshoot this problem you have to start by re-calibrating the display in the Setup program or you can turn off the eco function.
6. Thread Breaks
The Bernina 880 Plus also faces thread breakage problems. This problem usually occurs when poor quality thread is used for sewing or when the needle is bent or worn out. In order to solve this problem make sure that you use quality threads and needles that are in good state.
7. Pressure Foot Not Recognized
The Bernina 880 Plus has a problem of not recognizing the attached pressure foot. This problem is usually caused by lenses that are soiled. The only way to solve this problem is to regularly clean the lenses using a damp cloth.
8. Trouble Saving Data On USB
The Bernina 880 Plus allows you to save data on your USB stick however, this can prove to be a challenge for many. One of the reasons why the machine might refuse to copy data is because the USB stick is not connected properly or formatted properly. In order to solve this make sure that you insert the USB into the PC and format it as FAT 32. Another reason why it can be hard to save data on the USB is because the USB will be out of memory and if it is the case make sure you delete some data.
How Much Does Bernina 880 Plus Weigh?
The Bernina 880 Plus weighs approximately 35.3lb. This machine is big in size and it contains many sophisticated features that you cannot find on a regular sewing machine.
How Often Should I Have My Bernina Serviced?
You should have your Bernina serviced at least once a year. This will help to ensure that problems are detected and fixed earlier. Furthermore, it helps to reduce the rate of wear and tear of the machine.
Is Bernina Worth The Money?
Yes Bernina is definitely worth the money. This is because all Bernina sewing machines are very durable and modern machines come with a sewing computer that you can easily use to detect and troubleshoot problems.
The Bernina 880 Plus is a good sewing machine to have despite the fact that it may face problems over time. It is worth noting that you should regularly service your Bernina sewing machine so that it can be able to last you a lifetime.