New Holland tractors are considered to be very durable and reliable however, that does not mean they do not usually experience problems when being used. Below we highlight some of the common problems that New Holland Workmaster 55 usually faces.
Table of Contents
What Is New Holland Workmaster 55?
The New Holland Workmaster 55 is a utility tractor that is equipped with a 3 cylinder diesel engine. It has a PTO horsepower of 40hp and it has infinite forward and reverse gears. This tractor is very durable and reliable.
New Holland Workmaster 55 Problems
NB: New Holland Workmaster 55 tractors are sold whilst they are in good condition and the problems indicated below are usually influenced by wear and tear or human error.
1. Starting Problems
One of the problems which you may experience with a New Holland Workmaster 55 is that the engine may refuse to start. This problem usually occurs when any of the following factors are present;
- Battery connections may be loose.
- Battery may be worn out or defective.
- There might be a problem with the fuel pump.
- Fuel line may be plugged.
Troubleshooting Starting Problems
When you experience starting problems with your New Holland Workmaster 55 here are a few ways in which you may try to resolve the issue;
- Check battery connections and ensure they are intact.
- Check battery voltage and if the battery us worn out or damaged you need to replace it with a new one.
- Check fuel pump and try to fix any problems. If the problems cannot be fixed you may replace the pump.
- Ensure that the fuel line is not plugged by cleaning it and removing any dirty filters.
You may also hear weird noises on a New Holland Workmaster 55 and these noises can be frustrating. Noises on a New Holland Workmaster are usually caused by the following;
- Worn out or broken gear shifts.
- Malfunctioning gears.
- Insufficient backlash.
Troubleshooting Noise Problem
If your New Holland Workmaster 55 is producing weird noises here is how you may try to troubleshoot the problem;
- Start by checking whether your gear shifts are in good condition. If they are worn out or damaged you will need to replace them.
- Check whether gears are functioning properly and try yo fix them if they are not.
- Adjust backlash.
3. Gear Problems
If you purchase a New Holland Workmaster 55 you may experience gear problems. In most cases you will find it difficult to change gears. This problem is usually caused by;
- Clutch may be worn out or damaged.
- Gear shift linkage maybe worn out or incorrectly positioned.
- There might not be any transmission fluid in your tractor.
Troubleshooting Gear Problems
- Check the condition of your clutch and replace it if worn out or damaged.
- If the gear shift linkage is incorrectly positioned you should fix it. If it is damaged you need to replace it. You should also lubricate the gear shift linkage.
- You should replenish transmission fluid in your tractor.
4. Malfunctioning Switches
If you have a New Holland Workmaster 55, there is a chance that you may have problems with the switches. In most cases the switches will not respond. This problem usually occurs when:
- There is a corroded connecting point.
- Switch is damaged.
Troubleshooting Malfunctioning Switches Problem
If the switches on your New Holland Workmaster 55 are malfunctioning you should try to use the following methods in order to troubleshoot the problem;
- If there is a corroded connecting point on your New Holland Workmaster 55 you need to try and clean that part.
- If you clean the part and your tractor still doesn’t work, it means there is a problem with the switch and you need to have it replaced.
5. Hydraulic Pressure Problems
If you own a New Holland Workmaster 55 there is a chance that you will face hydraulic problems. In most cases the tractor will loose its hydraulic pressure. This problem is usually caused by any of the following;
- There might be loose connections in the hydraulic system.
- There might be oil leaks in the hydraulic system.
Troubleshooting Hydraulic Pressure Problems
If your New Holland Workmaster 55 tractor is loosing its hydraulic pressure, here is how you may try to resolve the problem;
- Start by checking whether there are any loose connections in your hydraulic system and try to tighten them.
- Check whether there are any oil leakages on your tractor and try to fox the problem.
6. Engine Overheats
Another problem which you may experience with a New Holland Workmaster 55 is that the engine may start overheating. This problem usually occurs when any of the following things occur;
- There might be a clogged fuel or air filter.
- There might be no engine coolant in your tractor.
- There might be low oil in your tractor.
Troubleshooting Engine Overheats Problem
If you notice that the engine of your New Holland Workmaster is overheating, here are a few ways in which you may try to resolve the problem;
- Check air filter and fuel filter to ensure they are not clogged. If they are clogged you need to clean them.
- If there is no engine coolant in your tractor you need to replenish it.
- Check engine oil levels and replenish it if low.
How To Avoid New Holland Workmaster 55 Problems
You can avoid New Holland Workmaster 55 problems by regularly servicing and maintaining the tractor. This helps to ensure that you identify small problems befor they turn into something big. It is also important to know that you should discontinue using your tractor if you suspect that something is wrong with it. You can only start using it once the problem has been identified and fixed.
How Many Horsepower Is New Holland Workmaster 55?
The New Holland Workmaster 55 has a PTO horsepower of 40hp and a gross engine horsepower of 54.
Is New Holland Tractor A Good Tractor?
Yes, New Holland tractor is a good tractor. It is durable and very reliable.
The New Holland Workmaster 55 is a good tractor to own and while it may face certain problems its important to note that they can easily be resolved. If you are thinking of purchasing this tractor you should definitely do so.