5 Most Common Husqvarna 135 Mark II Problems (Solutions Included)

Every chainsaw has its problems and the Husqvarna 135 Mark II is no exception. In this article we are going to be looking at some of the most common problems you may experience with this chainsaw and how you can easily troubleshoot them at home.

Table of Contents

What Is Husqvarna 135 Mark II?

The Husqvarna 135 Mark II is a chainsaw that comes with a powerful and efficient Toro engine and low vibration technology that helps to reduce vibrations so that you can work more comfortably. The Husqvarna 135 Mark II comes with a smart starter system which makes it easy to start the machine with minimum effort. This chainsaw also has a centrifugal air cleaning system that helps to expel dust and debris before they react the air filter, and this improves engine performance.

Husqvarna 135 Mark II Problems

NB: Husqvarna 135 Mark II chainsaws are sold without any malfunctioning parts and the problems indicated below are usually influenced by wear and tear or by human error.

1. Starting Problems

Husqvarna 135 Mark II chainsaws may experience starting problems. This problem usually occurs when the following factors are present;

  • There might be a blockage in the fuel filter.
  • There might be a blockage in the air filter.
  • Spark plug may be defective or worn out.
  • You might have added the wrong or contaminated fuel in your chainsaw.
  • There might be leakages occurring.

Troubleshooting Starting Problems

If you notice that your Husqvarna Mark 135 II is experiencing starting problems, here are a few things you may try out in order to resolve the problem;

  • Check the fuel filter and ensure that it is not blocked. If there is a blockage you need to clean or replace it.
  • Check air filter and if there is a blockage you need to clean it.
  • Check whether the spark plug is still in good condition. If it is damaged you will have to replace it.
  • Check whether you added the correct fuel, if not, you will have to drain the fuel and replace it with the correct fuel.
  • Check whether there are any leakages on your chainsaw and try to fix them.

2. Compression Problems

The Husqvarna Mark 135 II sometimes faces compression problems. In order to know whether your chainsaw has this problem you need to pull the rope, if it doesn’t start, it may mean there is a problem with the compressor. Compression problems are usually caused by any of the following;

  • Damaged piston rings
  • Air leakages.

Troubleshooting Compression Problems

If you notice that your Husqvarna 135 Mark II is experiencing problems with its compression you need to use any of the following tactics in order to resolve the issue;

  • Check whether piston rings are in perfect condition. If they are damaged you will have to replace them.
  • Check whether there are any leakages on your chainsaw and try to fix them.
  • If the problem persists you should take your chainsaw to a reputable dealer and have it fixed.

3. Cutting Problems

Another problem which you may experience with the Husqvarna 135 Mark II is that the chainsaw may refuse to cut things. This problem usually occurs when any of the following things happen;

  • You may have forgotten to tune your chain.
  • Chainsaw teeth may be dull.
  • The chain bar may be worn out.

Troubleshooting Cutting Problems

If your Husqvarna Mark 135 II chainsaw is refusing to cut things, here are a few ways in which you may try to resolve the problem;

  • You should tune your chainsaw by adjusting the screws.
  • Sharpen chainsaw teeth if they are dull.
  • If the chain bar is worn out you need to replace it with a new one.

4. Chainsaw Suddenly Stops Running

Another problem which you may experience with a Husqvarna 135 Mark II is that the engine may suddenly stop running. This problem usually occurs when any of the following factors are present;

  • There might be old or contaminated fuel in your chainsaw.
  • The carburetor may be clogged.
  • The vents may be clogged.

Troubleshooting Chainsaw Suddenly Stops Running Problem

If your Husqvarna 135 Mark II chainsaw suddenly stops whilst you are running it, here are a few ways in which you may try to troubleshoot the problem;

  • You should start by draining any old or contaminated fuel and ten replacing it with clean, fresh fuel.
  • If the carburetor is clogged, you need to clean it.
  • Check whether vents are clogged and try to remove any debris or dirt that may be trapped inside.

5. Excessive Vibration

Another problem which you may experience with Husqvarna 135 Mark II chainsaws is that they may start vibrating excessively. This problem usually occurs when;

  • There might be loose chains or components on your chainsaw.

Troubleshooting Excessive Vibration Problem

If your chainsaw is vibrating excessively here is how you can troubleshoot the problem;

  • Tighten all loose chains and make sure that there are no loose components on your chainsaw.

How To Avoid Husqvarna 135 Mark II Problems

The best way to avoid Husqvarna 135 Mark II problems is to regularly maintain and service your chainsaw. This helps to ensure that it stays in perfect condition. If you notice that your chainsaw is experiencing problems it is best to take it to a repairer rather than to continue using it.

Why Is Husqvarna Chainsaw Hard To Start?

Your Husqvarna chainsaw may be hard to start because of a number of reasons. Firstly there might be a problem with the compression or the fuel filter and air filter may be clogged. A faulty spark plug and use of old or contaminated fuel may also cause the chainsaw not to start.

How Many Pulls Does It Take To Start A Chainsaw?

It usually takes 1 to 3 pulls to start a chainsaw. If you notice that its taking more pulls to start your chainsaw it may mean that it has a problem.

Conclusion

The Husqvarna 135 Mark II may seem like a problematic chainsaw however, it is actually one of the best chainsaws you will find on the market. The problems indicated in this article can be avoided if you regularly service your chainsaw.