Knowing which problems your remote control is likely to succumb to can make it easier for you to troubleshoot them in future. Below we discuss some of the common B&D Control-A-Door problems and how you can easily resolve them at home.
Table of Contents
What Is A B&D Control-A-Door?
The B&D Control-A-Door is a garage door opener that is designed to fit seamlessly into your pocket. This door opener comes with sophisticated features like Smart phone control and safe lock anti tamper system. The B&D Control-A-Door comes with an optional backup battery which you can use when there is a power outage. This garage door opener usually comes with a warranty of up to 7 years so you are guaranteed to be getting value for your money.
B&D Control-A-Door Troubleshooting
NB: B&D Control-A-Door openers are sold without any malfunctioning parts and the problems indicated below are usually caused by wear and tear.
1. Door Opener Does Not Work
One of the problems which you may experience with a B&D Control-A-Door is that the opener may refuse to work. This problem is usually caused by any of the following;
- The opener may not have enough power.
- The springs of the garage door may be broken.
- The battery in your transmitter may be flat.
- The opener may be set to “vacation mode.”
- The transmitter code has not been set.
Troubleshooting Door Does Not Open Problem
If the door is refusing to open, here are a few ways in which you can troubleshoot your B&D Control-A-Door;
- Check if the opener has enough power. If it doesn’t you will need to replace the fuse since it would have been blown out.
- If the springs of the garage door are damaged you will need to have them fixed or replaced.
- If the battery in the transmitter is flat you will need to have it replaced.
- Turn off “Vacation Mode” if the transmitter is turned on to Vacation mode.
- If the transmitter code has not been set you will need to set it by making reference to your manual.
2. Transmitter Range Restricted Or Varies
When you have the B&D Control-A-Door there is a chance you will experience problems with the transmitter which tends to get restricted. This problem is usually caused by any of the following factors;
- Battery may be flat or faulty.
- The transmitter is placed in the wrong position.
- Aerial is not correctly positioned.
Troubleshooting Transmitter Range Restricted Problem
If the transmitter range of your B&D Control-A-Door is restricted you can try any of the following techniques in order to resolve the issue;
- If the battery is faulty or flat you will need to change it.
- Change the position of your transmitter.
- If the aerial is incorrectly positioned you need to fix it or install an external aerial kit.
3. Door Reverses For No Reason
Another problem which you may experience with a B&D Control-A-Door is that the door may start reversing for no reason. This problem is usually caused by any of the following things;
- The door may not be properly balanced.
- There might be something obstructing the door.
- There might have been a change of weather.
Troubleshooting Door Reverses For No Reason Problem
If the door of your B&D Control-A-Door reverses for no reason you can try using any of the following guidelines to try and resolve the issue;
- If the door is not properly balanced you will have to correct that.
- Remove anything that may be preventing the door from closing.
- If there has been a change in weather, your door will eventually adapt.
4. Door Opens But Does Not Close
When you have a B&D Control-A-Door, the door may open but refuse to close. This problem is usually caused by the following;
- Infra-red beam may be incorrectly installed.
- Auto-close not enabled.
Troubleshooting Door Opens But Does Not Close Problem
If the door of your B&D Control-A-Door is only opening and not closing you can try any of the following in order to resolve the issue;
- Check whether infra-red beam is correctly installed and functional.
- Check whether auto-close is enabled.
5. Door Opens And Closes By Itself
When you have B&D Control-A-Door the garage door may open and close by itself. This problem usually occurs when any of the following factors are present;
- There might be a neighbor who has a garage door that uses the same frequency code as you.
- Remote button may be stuck on “ON.”
Troubleshooting Door Opens And Closes By Itself Problem
If you suspect that your B&D Control-A-Door is opening and closing the garage door by itself you can try any of the following techniques in order to resolve the problem;
- If there is a neighbor who is using the same frequency as yours you will need to change your code.
- If the remote button is stuck on “ON” you need to have it fixed.
6. Operator Light Does Not Turn On
When you have a B&D Control-A-Door the operator light may refuse to turn on. This problem is usually caused by the following;
- Globes may be burnt.
Troubleshooting Operator Light Does Not Turn On Problem
When the operator light of your B&D Control-A-Door does not turn on you should consider replacing the globes.
How Do I Reset My B&D Remote?
If you want to reset your B&D remote you need to press and hold the code set button for 8 to 15 seconds. A light will flash which indicates that the code has been reset.
Why Is My Garage Door Clicking And Not Opening?
Your garage door may be clicking and not opening because the garage door is misaligned or it needs to be adjusted. When you notice that the door is clicking you need to call an expert to help you fix the problem.
Conclusion
The B&D Control-A-Door is a good device to own and while it may seem problematic it’s important to know that it is one of the best garage door openers you will find on the market. The problems indicated in this article can easily be resolved by following the guide above so don’t be scared to purchase the B&D Control-A-Door.
