The Geringhoff corn head is an essential piece of farming machinery for harvesting corn. However like any other equipment it is susceptible to problems. In this article we will be discussing the most common Geringhoff corn head problems and how to troubleshoot them. So without further adue, here’s more on the Geringhoff corn head and its most common problems.
Table of Contents
What Is The Geringhoff Corn Head?
The Geringhoff corn head is an attachment that is mounted on the front of a combine harvester. It is designed to pick, snap and husk corn from the stalk. The Geringhoff corn head is known for its efficiency and speed, making it a popular choice among farmers.
Geringhoff Corn Head Problems
1. Corn Head Not Feeding Properly Issue
One of the most common problems with the Geringhoff corn head is that it may not feed properly. This is usually due to a buildup of debris in the feeder housing or the feeder chain being too loose.
Troubleshooting The Corn Head Not Feeding Properly Issue
- Start by checking the feeder chain tension. If it is too loose then you need to adjust it according to Geringhoff’s specifications.
- If the feeder chain tension is correct, then check for any debris buildup in the feeder housing. Debris buildup can cause the feeder housing to become clogged thus preventing the corn from being fed through.
- Use a wire brush to remove any debris and ensure that the feeder housing is clean.
- Also check the chains for wear and replace them if necessary.
2. Corn Head Snapping Chains Issue
Another common issue with the Geringhoff corn head is that the chains may snap. This can be caused by a variety of factors like;
- Improper tension
- Debris buildup
- Worn-out chains
Troubleshooting The Corn Head Snapping Chains Issue
- Start by checking the chain tension. If it is too loose then tighten it according to Geringhoff’s specifications.
- Check the chains for any debris and clean them if necessary. Also, worn-out chains can also be a cause of snapping.
- Inspect the chains for any signs of wear and replace them if necessary.
3. Corn Head Points Wearing Problem
The gathering points on a Geringhoff corn head are designed to pull the corn off the stalk. However due to the nature of their job they may wear out quickly.
Troubleshooting The Corn Head Points Wearing Problem
- First you need to check the gathering chain tension. If it is too loose then the gathering points may not be gripping the corn properly, causing them to wear out quickly.
- If the tension is correct then check for any debris buildup on the gathering points. Debris can cause the gathering points to wear out faster than usual.
- Clean the gathering points thoroughly and ensure that they are free of debris.
- If the combine is moving too fast, the gathering points may not have enough time to properly grip the corn, causing them to wear out quickly. Slow down the combine harvester to allow the gathering points to do their job properly.
4. Corn Head Auger Turning Issue
The auger on a Geringhoff corn head is responsible for moving the corn from the feeder housing to the combine harvester. If the auger is not turning then the corn will not be properly fed through the corn head.
Troubleshooting The Corn Head Auger Turning Issue
- Start by checking the auger drive belt tension. If the tension is too loose then tighten it.
- Check for any debris buildup in the auger housing. Debris buildup can cause the auger to become clogged, preventing it from turning.
- Clean the auger housing thoroughly and ensure that it is free of debris.
- Check the motor for any signs of damage and replace it if necessary.
5. Corn Head Snouts Placement Issue
The snouts on a Geringhoff corn head are designed to follow the contour of the ground thus ensuring that the corn is picked up properly. If the snouts are not staying in place, the corn may not be picked up properly.
Troubleshooting The Corn Head Snouts Placement Issue
- Start by checking the snout tension. If it is too loose then tighten it according to Geringhoff’s specifications.
- Check for any debris buildup on the snout tracks. Debris can cause the snouts to become clogged, preventing them from staying in place.
- Clean the snout tracks thoroughly and ensure that they are free of debris.
- Check the rollers for any signs of wear and replace them if necessary.
How To Prevent Problems With The Geringhoff Corn Head
- Ensure that the chains are properly and regularly lubricated.
- The gathering points and snouts are always supposed to be clean.
- The tension on the Geringhoff corn head always needs to be adjusted and corrected.
- Ensure that the combine harvester is moving at the correct speed to prevent unnecessary wear and tear on the corn head.
- If you have any issues with the Geringhoff corn head and you don’t know where or how to begin be sure to first read the corn head’s user manual or consult the help of a farming equipment expert for further assistance.
Can I Use A Geringhoff Corn Head On Any Combine Harvester?
No, Geringhoff corn heads are designed to be used on specific combine harvester models. So ensure that you are using the correct corn head for your combine harvester.
How Often Should I Perform Maintenance On My Geringhoff Corn Head?
It is recommended to perform maintenance on the Geringhoff corn head after every 100 hours of use. However it is always best to refer to Geringhoff’s specifications for specific maintenance time intervals.
Conclusion
The Geringhoff corn head is an essential piece of machinery for harvesting corn. However, it is susceptible to problems. By understanding the most common Geringhoff corn head problems and how to troubleshoot them, you can ensure that your corn head is running smoothly and efficiently. Remember to perform regular maintenance to prevent problems from occurring and refer to Geringhoff’s specifications for any additional information you may need in order to understand this engineering marvel.