The Westinghouse iGen 2200 is one of the most convenient generators to have however, it has problems of its own which you can easily resolve at home. In this article we discuss some of the most common Westinghouse iGen 2200 problems and how you can easily resolve them at home.
Table of Contents
What Is Westinghouse Igen 2200?
The Westinghouse iGen 2200 is a portable invertor generator that is fuel efficient and has up to 12 hours run time. This generator produces 2 200 peak watts and 1 800 running watts. The Westinghouse iGen 2200 is able to power most home appliances like the refrigerator and tv, so if you are travelling you will be able to charge most of your appliances or devices. The Westinghouse iGen 2200 is equipped with a 4 stroke OHV Westinghouse engine.
Westinghouse IGen 2200 Problems
NB: The Westinghouse IGen 2200 portable generator is sold without any malfunctioning parts and the problems highlighted below are usually influenced by wear and tear or human error.
1. Starting Problems
The Westinghouse iGen 2200 usually experiences starting problems and this happens when the following things occur;
- The generator might not have any fuel.
- Oil level may be low.
- You may have added stale or contaminated fuel.
- Engine may not be choked.
- Fuel cap vent may be in in the OFF position.
- Fuel switch control may be in the OFF position.
- Spark plug may be dirty or faulty.
- Air filter may be dirty.
- Spark arrestor may be dirty or blocked.
Troubleshooting Starting Problems
If you are experiencing starting problems with your Westinghouse iGen 2200 generator you should try the following methods in order to resolve the problem;
- Check fuel levels and replenish if low.
- Check oil levels and replenish if low.
- If you had added stale or contaminated fuel into your generator you need to drain it out and replace with clean, fresh fuel.
- Move the choke control to the START or CHOKE position.
- Place fuel cap vent in the ON position.
- Adjust fuel switch control and place it in the ON position.
- Clean, fix or replace spark plug if it is either dirty or damaged.
- Clean air filter if it is dirty.
- Clean spark arrestor if it is dirty or blocked.
2. Engine Suddenly Stops
Another problem which you may encounter with a Westinghouse iGen 2200 generator is that it may just stop whilst it was running. This problem is usually caused by the following,
- The generator may have run out of fuel.
- Fuel may be contaminated with water.
- Oil level may be low.
- Spark plug may not be comnected properly.
- Generator may be overloaded.
- Fuel cap vent may be in the OFF position.
Troubleshooting Engine Suddenly Stops Problem
When you notice that your Westinghouse iGen 2200 generator is experiencing problems of stopping all of a sudden you should try the following techniques in order to resolve the problem;
- Check fuel levels and if it is low you need to replenish it.
- Drain fuel and replace it with clean fuel.
- Add more oil to the generator.
- Check and ensure that the spark plug is connected properly.
- If generator is overloaded try to disconnect other appliances which may be using too much power.
- Ensure fuel cap vent is in the ON position.
3. Engine Runs Erratically
The engine of your Westinghouse iGen 2200 can start running erratically and this problem is caused by the following;
- Engine may not be warm enough.
- Air filter may be dirty or blocked.
- Choke control may be in the START or ON position.
- Fuel may be stale or contaminated.
- Generator may be overloaded.
Troubleshooting Engine Runs Erratically Problem
When the engine of your Westinghouse iGen 2200 starts running erratically you should try the following techniques in order to resolve the problem;
- Disconnect all appliances from the generator and allow the generator to run for about 2 minutes before plugging back all the appliances.
- Clean air filter if it is dirty or blocked.
- Put choke control switch in the RUN or ON position.
- Drain fuel if it is stale and contaminated and replace it with clean fuel.
- Unplug all appliances from the generator and start plug appliances one by one until you identify the appliance that is causing the generator to run erratically.
Causes Of Westinghouse IGen 2200 Problems
Poor Maintenance
One of the main reasons of Westinghouse iGen 2200 problems is poor maintenance of the generator. If you do not regularly check the condition of your generator there is a good chance that it will develop most of the problems indicated in this article.
Excessive Use
Another cause of Westinghouse iGen 2200 generator problems is excessive use of the generator. If you are constantly using your generator and not giving it enough time rest it will definitely develop most of these problems.
How To Avoid Westinghouse iGen 2200 Problems
The best way to avoid Westinghouse iGen 2200 problems is to regularly service and maintain the generator. This helps to ensure that problems are identified earlier before they turn into something bigger. You should service your generator at least twice a year so that it remains in good condition. If you notice any worn out parts on your generator you should replace them immediately.
How Much Oil Does A Westinghouse iGen 2200 Hold?
The Westinghouse iGen 2200 holds approximately 11.8oz of oil.
What Causes A Generator To Stop Working?
There are a number of factors that can cause a generator not to work however, below are some of the most basic reasons;
- Lack of fuel.
- Use of contaminated fuel.
- Faulty spark plug.
- Blocked air filter.
- Generator may be overloaded.
- Oil level may be low.
What Happens If You Run A Generator Without Air Filters?
If you run a generator without putting the air filters you may cause permanent damage to the engine.
Conclusion
The Westinghouse iGen 2200 generator is a good generator to purchase and the problems indicated below are not unique to this brand but can also be found on other generators. If you are thinking of buying this generator you should go for it, it is definitely worth every penny.
